Skip Navigation Links.
Solution Graphics
Shopping Cart
Skip Navigation Links
LOGIN FOR YOUR BEST PRICE

AIR HYDRAULIC FOOT PUMP 10000 PSI1.7 LIT

 New and improved website Freight Free

Enquiry
AIR HYDRAULIC FOOT PUMP 10000 PSI1.7 LIT
Click on image for larger photo
Product Code: VPAHP10

FOOT PEDEL PUMP AIR HYDRAULIC 10000 PSI.
AIR REQUIRED IS 120 PSI - OIL 1.7 LITRE
HYDRAULIC HOSE TO SUIT P/N 65844HOSE.
Border Image Border Image
Shop Price: $399.00
Web Price: $399.00  inc tax
 
Availability: Out of stock
Quantity:
Weight: 8.5 KG    Volume: 0.01
Border Image Border Image
- AIR PUMP BUILT-IN OVERLOAD SYSTEM PREVENTS PUMP FROM BEING USED BEYOND ITS SAFETY CAPACITY
- AIR PUMP / RELEASE PEDAL DESIGNED TO BE ACTIVATED BY HAND OR FOOT
- FILTER PREVENTS CONTAMINANTS FROM ENTERING HYDRAULIC SYSTEM
- HYDRAULIC HOSE NOT INCLUDED PART NUMBER 2-9766 OLD PART NUMBER 65844HOSE
- OTC HALF COUPLER PART NUMBER 9798 (HOSE END) WITH BUSH ADAPTOR PART NUMBER 21-022403
- BUILT IN OVERLOAD SYSTEM
- FILTERING SYSTEM PREVENTS CONTANIMANTS FROM ENTERING SYSTEM

UNIT SIZE: 250MM X 120MM WIDE X 200MM HIGH WITH 1/4" FEMALE AIR INTAKE & 3/8"HYDRAULIC HOSE FEMALE FITTING

THIS AIR/HYDRAULIC PUMP SUPPLIES HYDRAULIC FLUID PRESSURE TO SELECTED TOOLS. IT CONSISTS OF AN IN-LINE AIR AND HYDRAULIC CYLINDER. THE RATIO OF HYDRAULIC FLUID PRESSURE GENERATED COMPARED TO SUPPLY AIR PRESSURE IS 100:1.
(100PSI OUT FOR EVERY 1PSI IN - 100 PSI INPUT AIR PRESSURE EQUALS 10 000 OUTPUT PRESSURE)

WARNING - THE AIR/HYDRAULIC PUMP IS CAPABLE OF GENERATING FLUID PRESSURE UP TO 10 000 PSI. MAKE CERTAIN THE TOOL IN USE IS HELD SECURELY AND IS IN PROPER WORKING CONDITION. DO NOT CONTINUE TO OPERATE THE PUMP ONCE THE WORK IS COMPLETED. FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN PERSONAL INJURY OR DAMAGE TO THE EQUIPMENT.

BEFORE USE - TO PREVENT OIL LEAKAGE DURING SHIPMENT, A SHIPPING PLUG IS USED TO ENSURE THE BEST SEALING FUNCTION. REMOVE THE SHIPPING OIL PLUG AND REPLACE IT WITH THE VENTED OIL PLUG PROVIDED.

NOTE - ALWAYS SECURE THREADED PORT CONNECTION WITH NON HARDENING PIPE THREAD COMPOUND. TIGHTEN SECURELY TO PREVENT ACCIDENTAL REMOVAL OF COMPONANTS WHILE IN USE. TAKE CARE NOT TO INTRODUCE COMPOUND INTO PORT ORIFICES. FAMILIARIZE YOURSELF WITH THE SPECIFICATION AND ILLUSTRATIONS IN THE OPERATING MANUAL. KNOW YOUR PUMP, IT'S LIMITATIONS AND HOW IT OPERATES BEFORE ATTEMPTING TO USE. REFER TO SPECIFICATION CHART ON ABOVE FOR DETAILS OF OIL PORT THREAD SIZE, USEABLE OIL CAPACITY AND MORE.

OPERATION - OPERATION OF THE UNIT IS AS FOLLOWS:
- CONNECT THE HOSE OF THE AIR/HYDRAULIC PUMP TO THE HYDRAULIC COUPLING OF THE SELECTED TOOL.
- CONNECT THE AIR SUPPLY LINE TO THE AIR/HYDRAULIC PUMP. AIR SUPPLY SHOULD BE 5-10CFM AT 100 PSI TO OBTAIN PROPER OPERATING CHARACTERISTICS. IN ADDITION, THE AIR LINE SHOULD BE EQUIPPED WITH AN AIR FILTER.
- STEPPING ON THE PUMP END OF THE PEDAL ENGAGER WILL PRODUCE THE FORCE NECESSARY TO RUN THE TOOL.
- DEPRESSING THE RELEASE END OF THE PUMP PEDAL WILL RELEASE THE PRESSURE.

NOTE: WHEN USING 10,000 LBS HIGH PRESSURE HYDRAULICS, EXTREME CARE MUST BE TAKEN WHEN ADAPTING HOSES AND FITTINGS TO THE PUMPS AND RAMS. BECAUSE OF THE HIGH PRESSURE, WHEN USING ADAPTORS TO FIT HOSES TO THE RAMS WE STRONGLY RECOMMEND YOU USE STEEL HIGH PRESSURE FITTINGS BECAUSE BRASS FITTINGS CAN ONLY TAKE UP TO 500PSI & WILL FAIL OR LEAK. A RANGE OF THESE STEEL FITTINGS CAN BE FOUND UNDER (PORTA POWER - FITTINGS) ON OUR WEBSITE UNDER THE ( HYDRAULICS - AGRI ) HEADING.

SOME OF THE MOST USED HIGH PRESSURE FITTINGS ARE:

PART NUMBER (30-PRB-06-04N-SS) 3/8 X 1/4 NPT STAINLESS STEEL REDUCER.
PART NUMBER (T9790) 1/4 X 3/8 NPT STAINLESS STEEL REDUCER.
PART NUMBER (T9791) 3/8 X 1/4 NPT STEEL MALE ADAPTOR.

View Complete Range:
HYDRAULICS - AGRI > PORTA POWER HAND PUMPS*
HYDRAULICS - AGRI > PORTA POWER PUMPS - AIR*
ENGINEER MACHINERY > PORTA POWER HAND PUMPS*
TYRE EQUIPMENT & GEAR > PORTA POWER PUMPS - AIR*
Video:

   About Us     Contact Us     Privacy Policy     Terms & Conditions
 

© 2019 MARKINSON BUSINESS SOLUTIONS PTY LTD